the electric heating temperature control type frying machine is a high-performance series of green machine that uses the special direct electric heater designed by our factory as the heating source, and is controlled by the microcomputer electronic control line. it is at the advanced level in the same series of products in china.
first, characteristics and uses
1. the straight heater designed by our factory has high heating efficiency and fast heating, and the thermal efficiency can reach 95%, which is more than 30% more than the original ring heater;
2. due to the application of direct heating, the heating is uniform, the performance is reliable, the maintenance is convenient, and the working state is clear at a glance;
3, the degree of automatic temperature control is high, the heating temperature can be set arbitrarily, and the application is convenient and flexible;
4. the equipment is clean and hygienic and environmentally friendly during the production operation. it is suitable for the production and processing of various green leaves, which is conducive to the planning of standardized production workshops;
5, the installation is convenient and fast, there is no cumbersome installation procedure.
second, technical parameters (6cst-60 type)
project | unit | specification |
dimensions | mm | 1550x910x1420 |
supporting power | kw | 15 |
taiwan production | kg/h | 20-40 |
fried dry temperature | ℃ | 100-220 |
roller diameter | cm | 60cm |
machine quality | kg | 300 |
third, the machine installation and operation
1. connect the machine to the three-phase four-wire 380v power supply, and connect the ground wire at the same time;
2, the machine must be placed horizontally, the base parts must not be empty;
3. turn on the power, observe the machine voltage display table, and proceed to the next step after the voltage meets the requirements;
4. press the motor switch button to test run. after no error, stop the machine.
5. press the heating switch to set the temperature to the desired temperature value, start the main motor, and let the cylinder run;